Dr. Pen Replacement 36 Pin Cartridge

• The needles are made of high-quality stainless steel
• The 36 pin suits deep wrinkle, surgical and acne scarring applications best
• Ensure to use a new one each time, don't reuse 

Larger or Sensitive Areas
Higher pin cartridges are best suited for larger treatment areas or more delicate skin, such as the scalp, neck, décolletage, and upper or inner thighs. Because the pins are more densely distributed, the treatment is generally gentler but covers a wider area efficiently. It’s also highly effective for scalp microneedling routines, supporting targeted treatments to help combat hair loss concerns.

1. First, ensure that you have all the necessary equipment for sterilisation; gloves, isopropyl alcohol solution (70% or above) and a clean container to hold the solution.
2. Put on your gloves to avoid contaminating the cartridges during the sterilisation process.
3. Check on your cartridge; ensure the needles are in perfect condition (i.e. not bending) and remove any debris.
4. Pour enough alcohol solution into the container and dip the cartridge needle into a sterilisation container, then soak for a couple of minutes.
5. If you have alcohol solution in a spray model, you can spray it towards the needle head of the cartridge.
6. Once the sterilisation is complete, allow the cartridge to air dry before using it.
7. Finally, your cartridge is ready for use.

How to Use

• To ensure there is no cross-contamination, cartridges must be sterilised before treatment.
• Double-cleanse (cleanse and repeat) then wipe the skin clean with an alcohol wipe. Fully tie back your hair, away from your face. 
• Work in small areas and apply serum to each area before needling. This will help to ensure that the pen does not drag or pull on the skin. The recommended pattern to move the pen for best results is vertical, horizontal, and then diagonal in both directions. Using a light pressure and without dragging, repeat this motion over each area two times.